Martini Anti-Wear Hydraulic Oils ISO 32, 46, 68

Martini Anti-Wear Hydraulic Oils are premium grade hydraulic oil formulations. Martini Anti-Wear hydraulic oils are made from high Viscosity Index base oils with special rust, oxidation, foam inhibitors and non-zinc anti-wear additives. Martini Anti-Wear Hydraulic Oils promote excellent cleanliness, extended fluid life, demulsibility and filterability even if contaminated by water. As an added benefit of the non-zinc additive system they will not hydrolize.

Martini Anti-Wear Hydraulic Oils have a long service life due to our superior chemical and thermal stability additive system. This non-zinc additive system ensures ultra-fine filters and close tolerance spool valves are kept operational under extreme conditions. Another formulation benefit is excellent air release properties to minimise compressibility and prevent noisy and erratic operation.

Martini Anti-Wear Hydraulic Oils are specifically designed for hydraulic systems requiring exceptional anti-wear characteristics. This requirement is demanded in systems with vane pumps operating at pump pressure above 7MPa (1000 psi) and speeds above 1200 rpm.
Martini Anti-Wear Hydraulic Oils are especially suitable in other systems where the wear rates are unfortunately high with conventional hydraulic oils. Martini Anti-Wear Hydraulic
Oils are compatible with hydraulic oils that contain a zinc based anti-wear system.
Martini Anti-Wear Hydraulic Oil Viscosities cover the range required by almost all high-pressure systems.

Meets the requirements of: DENISON HF-0 and HF-2, VICKERS 35VQ25

Available in a variety of viscosities. Please contact our office for further information.